Victron BP100 BatteryProtect (100 Amps / M8 Stud)

Victron BP100 BatteryProtect (100 Amps / M8 Stud)

Name: Victron BP100 BatteryProtect (100 Amps / M8 Stud)
SKU: VC-BPR110022000

Product code: VC-BPR110022000
Manufacturer SKU: BPR110022000

Description

Victron BatteryProtect BP100 disconnects the battery from non-essential loads before it becomes completely discharged. It can be set to disconnect at several different voltages and a digital display is built in to indicate what setting has been selected. An alarm signal is also built in that can be used for an external buzzer/warning light, this alarm is triggered 90 seconds before disconnect. The battery protector unit automatically detects the system voltage (12V/24V) and has over-voltage protection built in. Continuous load rating 100A.

NOTE: The battery protect can be used with all types of battery technology.

- Alarm output delay: 12 seconds

- Maximum load on alarm output: 50mA (short circuit proof)

- Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)

- Load reconnect delay: 30 seconds

Key Features

12/24V auto ranging

Programming made easy

Special setting for Li-ion batteries

Ultra low current consumption

Over voltage protection

Ignition proof

Delayed alarm output

Delayed load disconnect & delayed reconnect

Specifications

Torque	Mounting: 9 Nm
Brand	Victron
Type	Load Switchers
Voltage Description	6V - 35V DC
Rating	Electronics: IP67 (potted), Connections: IP00
Height Description	48mm (1.9")
Width	55mm (2.2")
Depth	106mm (4.2")
Weight	0.5kg (0.6 lbs)
Consumption	On: 1.4 mA, Off / Low Voltage Shutdown: 0.9 mA
Operating Temperature	Full Load: -40°C to +40°C (up to 60% of nominal load at 50°C)
Amps Description	Max. continuous: 100A, Peak (during 30s): 600A
Connections Description	M8
Country of Origin	Netherlands